Monkey King Bar- 4.9 F.T Power Concrete Vibrators 13000 VPM Electric Concrete Vibrator 850W 110V/50HZ Handheld Construction Portable Pencil Concrete Vibrabrater

Voltage: 110V
Diameter: 1-3/8 inch
Vibration: 13,000 VPM
Rod Length: 15-1/8 inch
Rod Diameter: 1-3/8 inch
Shaft Length: 4.9 feet
Power Cord Length: 158 inch

How to Use:
Maintenance and inspection
1.Before any work on the machine itself, pull the mains plug.
2.The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushes can move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.
3.Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.
4.During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repaired.
5.Regular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately,failure to do so could result in personal injury.
6.Do not expose the tool to rain , Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk tocause fire or explosion.

Make sure this fits by entering your model number.
[Powerful and High-Speed]- 1 HP(850W) Concrete Vibrator More power than 3/4 HP(550W). Voltage: 110V;Diameter: 1-3/8 inches,Lightweight and compact design for all day use
[4.9 ft. Lengthen x 35mm copper cable]- 4.9 ft. long shaft for easy use and long reach,enlarge your work range.
[Remove air bubbles from cement ]- Portable Construction Insertion Electric Vibrator for Remove Air Bubbles in Concrete
✔We create high cost performance, low price, good quality–Please read the detail information and picture carefully before you purchasing✔